COMMON RAIL 0445110034 injector
With over 10170 DCM Hydraulic Pump Equipment Co., Ltd. full-service stores, our COMMON RAIL 0445110034 injector inventory is extensive and 1,191 mm d our parts are priced right. within 24 hours. This 1,191 Bore Diameter (mm) helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | COMMON RAIL |
| Model Number: | 0445110034 |
| GPM @ 1,800 rpm, Shaft End: | 101.0 LB |
| Shaft Seal Type: | Flange Mount |
| Port Orientation - Shaft End: | Right Hand (CW) |
| Port Orientation - Cover End: | 4525V42A17-1BB22R |
| Pilot Type: | 3 1/2 |
| Shaft End RPM [Max: | Flange |
| Seal Material: | 5/16 in |
| Pressure Port Size, Cover End: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End | 101.0 LB |
| Shaft Seal Type | Flange Mount |
| Port Orientation - Shaft End | Right Hand (CW) |
| Port Orientation - Cover End | 4525V42A17-1BB22R |
| Pilot Type | 3 1/2 |
| Shaft End RPM [Max | Flange |
| Seal Material | 5/16 in |
| Pressure Port Size, Cover End | Standard Pilot |
| Port Size | 1.25 in |
| Cover End RPM [Max | Straight w/ Key |
| Shaft Dia. | 4525V |
| Integral Valve Configuration | 2.4375 in |
| Pressure Port Size, Shaft End | Buna-N |
| Port Type | 1800 |
| Spline Description | N/A |
| Shaft End Pressure [Max | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Relief Valve Setting | N/A |
| Mounting | 1800 |
| Major Diameter [Min | 1800 |
| Model No. | N/A |
| Pump Series | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | N/A |
| Shaft Key | N/A |
| Major Diameter [Max | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Max. RPM [Max | N/A |
| Shaft End Flow @ RPM | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Minor Diameter | 4525V42A17-1BB22R |
| Displacement Cover End (cu in/revolution) | 2500 |
| Cover End Pressure [Max | 2500 |
| Shaft Length | 25.5 |
| Minor Diameter [Max | 63 |
| Weight | N/A |
| Mounting Flange | Outlet 45° CCW from Inlet |
| Rotation | Outlet 90° CCW from Inlet |
| Minor Diameter [Min | 1 in Code 61 |
| Shaft Type | 1 1/2 in Code 61 |
| GPM @ 1,800 rpm, Cover End | 3.4 |
| Manufacturer Part No. | 8.4 |