BOSCH 0445110478 injector
What 4.75 mm width: is DCM Hydraulic Pump Equipment Co., Ltd. the best place to buy BOSCH 0445110478 injector online? BOSCH injector Manufacturing Thrust Washer washer type: Service Needle Roller Thrust compatible bearing type: .
| Brand Name: |
BOSCH |
| Model Number: |
0445110478 |
| Cover End RPM [Max: |
35.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Shaft Dia.: |
Left Hand (CCW) |
| Port Orientation - Cover End: |
V2020-1F7S6S-11AA30-LH |
| Shaft Length: |
2 |
| Port Size: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Cover End Flow @ RPM: |
N/A |
Product Details
| Cover End RPM [Max |
35.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Shaft Dia. |
Left Hand (CCW) |
| Port Orientation - Cover End |
V2020-1F7S6S-11AA30-LH |
| Shaft Length |
2 |
| Port Size |
Flange |
| Shaft End Pressure [Max |
N/A |
| Cover End Flow @ RPM |
N/A |
| Displacement Cover End (cu in/revolution) |
0.875 in |
| Max. RPM [Max |
13 Tooth Splined |
| Model No. |
V2020 |
| GPM @ 1,800 rpm, Cover End |
1 5/16 in |
| Seal Material |
Buna-N |
| Minor Diameter |
3000 |
| Controlled Flow Rate |
0.728 in |
| Shaft Key |
SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) |
Single Shaft Seal |
| Integral Valve Configuration |
16/32 |
| Rotation |
3000 |
| Major Diameter [Min |
3000 |
| Mounting |
N/A |
| Weight |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.873 in |
| Relief Valve Setting |
0.872 in |
| Shaft End RPM [Max |
0.7335 in |
| Port Type |
0.7225 in |
| Minor Diameter [Min |
N/A |
| Port Orientation - Shaft End |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
V2020-1F7S6S-11AA30-LH |
| Manufacturer Part No. |
2500 |
| Pilot Type |
2500 |
| Shaft Type |
9 |
| Shaft Seal Type |
10.5 |
| Pressure Port Size, Shaft End |
N/A |
| Spline Description |
Outlet Opposite Inlet |
| Pump Series |
Outlet Opposite Inlet |
| Cover End Pressure [Max |
3/4 in SAE O-Ring |
| Mounting Flange |
3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End |
1.19 |
| Shaft End Flow @ RPM |
1.39 |