Danfoss Shut-off valves 148B4603 STC 20 A ANG SHUT-OFF VALVE HANDWHEEL
With over 10170 full-service stores, our Danfoss Shut-off valves 148B4603 STC 20 A ANG SHUT-OFF VALVE HANDWHEEL inventory is extensive and 22.65 mm s1 our parts are 100 °C T max. priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4603 STC 20 A |
| Displacement Cover End (cu in/revolution): |
75.0 LB |
| Shaft Length: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Relief Valve Setting: |
3520VQ25A11-11AA20 |
| Displacement Shaft End (cu in/revolution): |
3 |
| Pump Series: |
Flange |
| Port Size: |
N/A |
| Major Diameter [Min: |
Standard Pilot |
Product Details
| Displacement Cover End (cu in/revolution) |
75.0 LB |
| Shaft Length |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Relief Valve Setting |
3520VQ25A11-11AA20 |
| Displacement Shaft End (cu in/revolution) |
3 |
| Pump Series |
Flange |
| Port Size |
N/A |
| Major Diameter [Min |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Pilot Type |
14 Tooth Splined |
| Shaft Dia. |
3520VQ |
| Major Diameter [Max |
1 15/16 in |
| Mounting |
Buna-N |
| Shaft Seal Type |
2500 |
| Shaft End Pressure [Max |
1.04 in |
| Shaft End RPM [Max |
SAE C, 2 Bolt |
| Minor Diameter [Max |
Single Shaft Seal |
| Manufacturer Part No. |
12/24 |
| Cover End Flow @ RPM |
2500 |
| Shaft End Flow @ RPM |
2500 |
| Controlled Flow Rate |
N/A |
| GPM @ 1,800 rpm, Shaft End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
1.248 in |
| Shaft Key |
1.247 in |
| Minor Diameter |
N/A |
| Cover End RPM [Max |
N/A |
| Port Orientation - Shaft End |
N/A |
| Pressure Port Size, Shaft End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Type |
3520VQ25A11-11AA20 |
| Weight |
3000 |
| Mounting Flange |
3000 |
| Rotation |
16.5 |
| Model No. |
37.5 |
| Seal Material |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 135° CCW from Inlet |
| Integral Valve Configuration |
Outlet Opposite Inlet |
| Shaft Type |
3/4 in Flange |
| Spline Description |
1 1/4 in Flange |
| Port Orientation - Cover End |
2.22 |
| Pressure Port Size, Cover End |
4.98 |