Danfoss Shut-off valves 148B4655 STC 50 M ANG SHUT-OFF VALVE HANDWHEEL
Can't find Available Volume Discount what you're looking for Danfoss Shut-off valves 148B4655 STC 50 M ANG SHUT-OFF VALVE HANDWHEEL ? Our expert Danfoss Shut-off valves Representatives be in contact with you Double Number of Bearings shortly!
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4655 STC 50 M |
| Shaft Seal Type: |
75.0 LB |
| Spline Description: |
Flange Mount |
| Mounting: |
Right Hand (CW) |
| Major Diameter [Min: |
3520V35A12-1AC22R |
| Max. RPM [Max: |
3 |
| Weight: |
Flange |
| Minor Diameter [Min: |
5/16 in |
| Shaft End RPM [Max: |
Standard Pilot |
Product Details
| Shaft Seal Type |
75.0 LB |
| Spline Description |
Flange Mount |
| Mounting |
Right Hand (CW) |
| Major Diameter [Min |
3520V35A12-1AC22R |
| Max. RPM [Max |
3 |
| Weight |
Flange |
| Minor Diameter [Min |
5/16 in |
| Shaft End RPM [Max |
Standard Pilot |
| Rotation |
1.25 in |
| Displacement Cover End (cu in/revolution) |
Straight w/ Key |
| Displacement Shaft End (cu in/revolution) |
3520V |
| Minor Diameter [Max |
2 7/8 in |
| Cover End Pressure [Max |
Buna-N |
| Cover End RPM [Max |
1800 |
| Port Type |
N/A |
| Port Orientation - Shaft End |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Shaft Key |
N/A |
| Mounting Flange |
1800 |
| Pump Series |
1800 |
| Relief Valve Setting |
N/A |
| Pilot Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Type |
N/A |
| Port Size |
N/A |
| Port Orientation - Cover End |
N/A |
| Manufacturer Part No. |
N/A |
| Controlled Flow Rate |
N/A |
| GPM @ 1,800 rpm, Cover End |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
3520V35A12-1AC22R |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Cover End Flow @ RPM |
2500 |
| Shaft Length |
18 |
| Minor Diameter |
52.5 |
| Model No. |
N/A |
| Pressure Port Size, Cover End |
Outlet 45° CW from Inlet |
| Shaft End Pressure [Max |
Outlet Opposite Inlet |
| Integral Valve Configuration |
3/4 in Code 61 |
| Seal Material |
1 1/4 in Code 61 |
| Major Diameter [Max |
2.5 |
| Shaft End Flow @ RPM |
6.8 |