Rexroth M-3SEW6U3X/420MG24N9K4 THROTTLE VALVE
Rexroth M-3SEW6U3X/420MG24N9K4 THROTTLE VALVE 0 Weight Deal is your source for OEM Rexroth THROTTLE VALVE and accessories. We sell GenuineRexroth THROTTLE VALVE at discount prices.
| Brand Name: | Rexroth |
| Model Number: | M-3SEW6U3X/420MG24N9K4 |
| Mounting: | 45.0 LB |
| Cover End Pressure [Max: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Left Hand (CCW) |
| Minor Diameter: | 2520VQ12A5-11CC20LH |
| Relief Valve Setting: | 2.5 |
| Model No.: | Flange |
| Controlled Flow Rate: | N/A |
| Spline Description: | Standard Pilot |
Product Details
| Mounting | 45.0 LB |
| Cover End Pressure [Max | Flange Mount |
| Displacement Cover End (cu in/revolution) | Left Hand (CCW) |
| Minor Diameter | 2520VQ12A5-11CC20LH |
| Relief Valve Setting | 2.5 |
| Model No. | Flange |
| Controlled Flow Rate | N/A |
| Spline Description | Standard Pilot |
| Integral Valve Configuration | 0.875 in |
| Cover End RPM [Max | 13 Tooth Splined |
| Shaft Key | 2520VQ |
| Major Diameter [Min | 1 3/8 in |
| Shaft Length | Double |
| Manufacturer Part No. | Buna-N |
| Cover End Flow @ RPM | 2700 |
| Pilot Type | 0.715 in |
| Rotation | SAE B, 2 Bolt |
| Pressure Port Size, Shaft End | Single Shaft Seal |
| Mounting Flange | 16/32 |
| Weight | 2700 |
| Port Orientation - Cover End | 2700 |
| Pressure Port Size, Cover End | N/A |
| Shaft End Pressure [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 0.873 in |
| Shaft Seal Type | 0.872 in |
| Displacement Shaft End (cu in/revolution) | 2.5 |
| Major Diameter [Max | N/A |
| Port Type | N/A |
| Shaft Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Seal Material | 2520VQ12A5-11CC20LH |
| Shaft End Flow @ RPM | 3000 |
| Shaft Dia. | 3000 |
| Minor Diameter [Min | 7.5 |
| Shaft End RPM [Max | 18 |
| Port Size | w/o Integral Valves |
| Pump Series | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet Inline w/Inlet |
| Max. RPM [Max | 3/4 in Flange |
| Minor Diameter [Max | 1 in Flange |
| Port Orientation - Shaft End | 1.1 |