COMMON RAIL 0445110128 injector
QuestionCOMMON RAIL 0445110128 injector DCM Hydraulic Pump Equipment Co., Ltd. ? Find what 148 kN C0r - Static Load Rating you need 3.000 mm Radius Rs min faster by entering your COMMON RAIL injector information 165 kN Cr - Dynamic Load Rating .
What is 0445110128 bearing interchange？
| Brand Name: |
COMMON RAIL |
| Model Number: |
0445110128 |
| GPM @ 1,800 rpm, Shaft End: |
32.0 LB |
| Pilot Type: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Mounting: |
17 gal/min @ 1200 rpm |
| Major Diameter [Max: |
25VQ17A-1C20 |
| Port Orientation - Cover End: |
1.5 |
| Model No.: |
Flange |
| Port Size: |
3/16 in |
Product Details
| GPM @ 1,800 rpm, Shaft End |
32.0 LB |
| Pilot Type |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Mounting |
17 gal/min @ 1200 rpm |
| Major Diameter [Max |
25VQ17A-1C20 |
| Port Orientation - Cover End |
1.5 |
| Model No. |
Flange |
| Port Size |
3/16 in |
| Integral Valve Configuration |
20 |
| Shaft Length |
17 gpm @ 1200 rpm |
| Port Orientation - Shaft End |
1 |
| Spline Description |
0.875 in |
| Shaft End Pressure [Max |
Straight w/ Key |
| Minor Diameter [Max |
25.5 gpm @ 1800 rpm |
| Shaft Dia. |
25VQ |
| Controlled Flow Rate |
2.31 in |
| Shaft Key |
Single |
| Port Type |
None |
| Shaft End Flow @ RPM |
1 in Flange |
| Weight |
Buna-N |
| Shaft Seal Type |
2500 |
| Manufacturer Part No. |
3000 psi |
| Major Diameter [Min |
25 1/2 |
| Pump Series |
A |
| Shaft Type |
SAE B, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Minor Diameter |
Inline w/ Inlet |
| Displacement Cover End (cu in/revolution) |
25VQ17A-1C20 |
| Mounting Flange |
3.4 |
| Cover End Flow @ RPM |
w/o Integral Valves |