DEUTZ DLLA 145P 2168 injector
DEUTZ DLLA 145P 2168 injector SEARCH - Whether it's 25 Roller Width B(mm) agriculture or DCM Hydraulic Pump Equipment Co., Ltd. construction equipment your working on, Has theDEUTZ injector you need.
| Brand Name: | DEUTZ |
| Model Number: | DLLA 145P 2168 |
| Displacement Cover End (cu in/revolution): | 35.0 LB |
| Major Diameter [Min: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Pressure Port Size, Cover End: | V2020-1F13S11S-1DD30 |
| Mounting Flange: | 2 |
| Displacement Shaft End (cu in/revolution): | Flange |
| Cover End Flow @ RPM: | 3/16 in |
| Cover End RPM [Max: | N/A |
Product Details
| Displacement Cover End (cu in/revolution) | 35.0 LB |
| Major Diameter [Min | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Pressure Port Size, Cover End | V2020-1F13S11S-1DD30 |
| Mounting Flange | 2 |
| Displacement Shaft End (cu in/revolution) | Flange |
| Cover End Flow @ RPM | 3/16 in |
| Cover End RPM [Max | N/A |
| Shaft Length | 0.875 in |
| Shaft Seal Type | Straight w/ Key |
| Shaft Key | V2020 |
| Spline Description | 2 5/16 in |
| Controlled Flow Rate | Buna-N |
| Weight | 2400 |
| Port Orientation - Shaft End | N/A |
| Pressure Port Size, Shaft End | SAE B, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Port Orientation - Cover End | N/A |
| Manufacturer Part No. | 2500 |
| Shaft Type | 2400 |
| Shaft End Flow @ RPM | N/A |
| Mounting | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Minor Diameter | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Port Type | N/A |
| Pilot Type | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Pump Series | V2020-1F13S11S-1DD30 |
| Minor Diameter [Min | 2500 |
| Max. RPM [Max | 2200 |
| Model No. | 16.5 |
| Shaft End RPM [Max | 19.5 |
| Shaft Dia. | N/A |
| Relief Valve Setting | Outlet 90° CW from Inlet |
| Minor Diameter [Max | Outlet 90° CW from Inlet |
| Port Size | 3/4 in SAE O-Ring |
| Rotation | 3/4 in SAE O-Ring |
| Shaft End Pressure [Max | 2.22 |
| Seal Material | 2.59 |