Danfoss Shut-off valves 148B4651 STC 32 M ANG SHUT-OFF VALVE HANDWHEEL
Danfoss Shut-off valves 148B4651 STC 32 M ANG SHUT-OFF VALVE HANDWHEEL Needs Analysis , Danfoss Shut-off valves Manufacturing Service . 11.5 Nm Recommended tightening torque for set screw 118 mm J Get Your Free. 100 °C T max.
What is 148B4651 STC 32 M bearing cross reference？
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4651 STC 32 M |
| Pump Series: |
45.0 LB |
| Minor Diameter: |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Relief Valve Setting: |
2520VQ14A12-11DD20 |
| Pressure Port Size, Shaft End: |
2 1/2 |
| Shaft Seal Type: |
Flange |
| Integral Valve Configuration: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| Pump Series |
45.0 LB |
| Minor Diameter |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Relief Valve Setting |
2520VQ14A12-11DD20 |
| Pressure Port Size, Shaft End |
2 1/2 |
| Shaft Seal Type |
Flange |
| Integral Valve Configuration |
N/A |
| Port Type |
Standard Pilot |
| Shaft Dia. |
0.875 in |
| Pressure Port Size, Cover End |
13 Tooth Splined |
| Minor Diameter [Max |
2520VQ |
| Port Orientation - Cover End |
1 3/8 in |
| Model No. |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2700 |
| Minor Diameter [Min |
0.715 in |
| Port Orientation - Shaft End |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Controlled Flow Rate |
16/32 |
| Shaft End Flow @ RPM |
2700 |
| Shaft End Pressure [Max |
2700 |
| Mounting Flange |
N/A |
| Max. RPM [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Seal Material |
0.873 in |
| Major Diameter [Max |
0.872 in |
| Cover End Flow @ RPM |
N/A |
| Rotation |
N/A |
| Major Diameter [Min |
N/A |
| Weight |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pilot Type |
2520VQ14A12-11DD20 |
| Cover End Pressure [Max |
2300 |
| Spline Description |
3000 |
| Mounting |
18 |
| Manufacturer Part No. |
21 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |
| Cover End RPM [Max |
Outlet 135° CW from Inlet |
| Shaft Length |
Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
3/4 in Flange |
| Shaft Type |
1 in Flange |
| Port Size |
2.41 |
| Shaft End RPM [Max |
2.77 |