american NJ1032 SINGLE ROW CYLINDRICAL ROLLER BEARING
How do I place an EMERGENCY order for a american NJ1032 SINGLE ROW CYLINDRICAL ROLLER BEARING 2 DA_ 1 LangID that I want to pick up at a DCM Hydraulic Pump Equipment Co., Ltd. our store?
| Brand Name: |
american |
| Model Number: |
NJ1032 |
| Port Orientation - Cover End: |
45.0 LB |
| Pilot Type: |
Flange Mount |
| Port Size: |
Left Hand (CCW) |
| Seal Material: |
2520VQ12A5-11CC20LH |
| GPM @ 1,800 rpm, Cover End: |
2.5 |
| Pressure Port Size, Shaft End: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Cover End Pressure [Max: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Pilot Type |
Flange Mount |
| Port Size |
Left Hand (CCW) |
| Seal Material |
2520VQ12A5-11CC20LH |
| GPM @ 1,800 rpm, Cover End |
2.5 |
| Pressure Port Size, Shaft End |
Flange |
| Shaft End Pressure [Max |
N/A |
| Cover End Pressure [Max |
Standard Pilot |
| Shaft Seal Type |
0.875 in |
| Mounting |
13 Tooth Splined |
| Max. RPM [Max |
2520VQ |
| Minor Diameter [Min |
1 3/8 in |
| Model No. |
Double |
| Minor Diameter |
Buna-N |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Spline Description |
0.715 in |
| Rotation |
SAE B, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Minor Diameter [Max |
16/32 |
| Shaft End RPM [Max |
2700 |
| Cover End RPM [Max |
2700 |
| Major Diameter [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
0.873 in |
| Pump Series |
0.872 in |
| Shaft Length |
N/A |
| Controlled Flow Rate |
N/A |
| Shaft Key |
N/A |
| Relief Valve Setting |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
2520VQ12A5-11CC20LH |
| Pressure Port Size, Cover End |
3000 |
| Shaft Dia. |
3000 |
| Port Type |
7.5 |
| Mounting Flange |
18 |
| Manufacturer Part No. |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 45° CW from Inlet |
| Weight |
Outlet Inline w/Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Integral Valve Configuration |
1 in Flange |
| Port Orientation - Shaft End |
1.1 |