DEUTZ DLLA 162P 2266 injector
Welcome to DCM Hydraulic Pump Equipment Co., Ltd. the DEUTZ DLLA 162P 2266 injector Cast Iron Unit Body Material J7 Fit online seller.
| Brand Name: | DEUTZ |
| Model Number: | DLLA 162P 2266 |
| Max. RPM [Max: | 45.0 LB |
| Mounting: | Flange Mount |
| Port Type: | Left Hand (CCW) |
| Minor Diameter [Max: | 2520VQ17A5-1AA20-LH |
| Relief Valve Setting: | 2 1/2 |
| Shaft End Pressure [Max: | Flange |
| Shaft End Flow @ RPM: | 3/16 in |
| Port Orientation - Shaft End: | Standard Pilot |
Product Details
| Max. RPM [Max | 45.0 LB |
| Mounting | Flange Mount |
| Port Type | Left Hand (CCW) |
| Minor Diameter [Max | 2520VQ17A5-1AA20-LH |
| Relief Valve Setting | 2 1/2 |
| Shaft End Pressure [Max | Flange |
| Shaft End Flow @ RPM | 3/16 in |
| Port Orientation - Shaft End | Standard Pilot |
| Model No. | 0.875 in |
| Pressure Port Size, Shaft End | Straight w/ Key |
| Port Size | 2520VQ |
| Shaft Type | 1 15/16 in |
| Spline Description | Buna-N |
| Port Orientation - Cover End | 2500 |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Pump Series | SAE B, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Seal Material | N/A |
| GPM @ 1,800 rpm, Cover End | 2700 |
| Major Diameter [Min | 2500 |
| Rotation | N/A |
| Integral Valve Configuration | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | N/A |
| Mounting Flange | N/A |
| Pilot Type | N/A |
| Weight | N/A |
| Shaft Dia. | N/A |
| Cover End RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 2520VQ17A5-1AA20-LH |
| Shaft Seal Type | 3000 |
| Shaft Length | 3000 |
| Cover End Flow @ RPM | 7.5 |
| Minor Diameter [Min | 25.5 |
| Controlled Flow Rate | w/o Integral Valves |
| Manufacturer Part No. | Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) | Outlet Opposite Inlet |
| Shaft Key | 3/4 in Flange |
| Displacement Cover End (cu in/revolution) | 1 in Flange |
| Pressure Port Size, Cover End | 1.1 |
| Minor Diameter | 3.37 |