Danfoss Shut-off valves 148B4612 STC 65 A ANG SHUT-OFF VALVE CAP
With 110 mm d over Ball Bearing Rolling Element 10170 full-service stores, our Danfoss Shut-off valves 148B4612 STC 65 A ANG SHUT-OFF VALVE CAP inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize 117 kN Static load, C0 your productivity by saving time and your hard-earned dollars.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4612 STC 65 A |
| Mounting Flange: |
30.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
V2010-1F13S6S-1DD12 |
| Shaft Dia.: |
1 1/2 |
| Shaft End Pressure [Max: |
Flange |
| Minor Diameter [Max: |
3/16 in |
| Mounting: |
N/A |
Product Details
| Mounting Flange |
30.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
V2010-1F13S6S-1DD12 |
| Shaft Dia. |
1 1/2 |
| Shaft End Pressure [Max |
Flange |
| Minor Diameter [Max |
3/16 in |
| Mounting |
N/A |
| Cover End RPM [Max |
0.875 in |
| Shaft End RPM [Max |
Straight w/ Key |
| Model No. |
V2010 |
| Port Orientation - Cover End |
2 5/16 in |
| Relief Valve Setting |
Buna-N |
| Pressure Port Size, Shaft End |
2400 |
| Shaft Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Spline Description |
Single Shaft Seal |
| Weight |
N/A |
| Pump Series |
3000 |
| Displacement Shaft End (cu in/revolution) |
2400 |
| Port Orientation - Shaft End |
N/A |
| Shaft Seal Type |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Minor Diameter |
N/A |
| Shaft Length |
N/A |
| Port Size |
N/A |
| Major Diameter [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Cover End Flow @ RPM |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft Key |
V2010-1F13S6S-1DD12 |
| Pilot Type |
2200 |
| Manufacturer Part No. |
2200 |
| Integral Valve Configuration |
9 |
| Minor Diameter [Min |
19.5 |
| Seal Material |
N/A |
| Major Diameter [Min |
Outlet 135° CW from Inlet |
| Pressure Port Size, Cover End |
Outlet 90° CW from Inlet |
| Cover End Pressure [Max |
1/2 in SAE O-Ring |
| Controlled Flow Rate |
3/4 in SAE O-Ring |
| Port Type |
1.19 |
| Rotation |
2.59 |