COMMON RAIL 0445110146 injector
Our highly-skilled and factory-trained service 150 Outer Diameter (mm) experts have the resources to help DCM Hydraulic Pump Equipment Co., Ltd. you with all your COMMON RAIL 0445110146 injector needs - including routine maintenance, major repairs, warranty service, and COMMON RAIL injector equipment inspections.
| Brand Name: | COMMON RAIL |
| Model Number: | 0445110146 |
| Port Size: | 45.0 LB |
| Mounting Flange: | Flange Mount |
| Controlled Flow Rate: | Right Hand (CW) |
| Pressure Port Size, Cover End: | 2520V17A11-1BA22R |
| Displacement Shaft End (cu in/revolution): | 2 1/2 |
| Shaft End Flow @ RPM: | Flange |
| Rotation: | 1/4 in |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Port Size | 45.0 LB |
| Mounting Flange | Flange Mount |
| Controlled Flow Rate | Right Hand (CW) |
| Pressure Port Size, Cover End | 2520V17A11-1BA22R |
| Displacement Shaft End (cu in/revolution) | 2 1/2 |
| Shaft End Flow @ RPM | Flange |
| Rotation | 1/4 in |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Major Diameter [Max | 0.875 in |
| Model No. | Straight w/ Key |
| Shaft Type | 2520V |
| Weight | 2.32 in |
| Manufacturer Part No. | Buna-N |
| Integral Valve Configuration | 1800 |
| Mounting | N/A |
| Max. RPM [Max | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Shaft Key | N/A |
| Shaft Dia. | 1800 |
| Minor Diameter [Max | 1800 |
| Shaft End Pressure [Max | N/A |
| Pilot Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | N/A |
| Port Orientation - Shaft End | N/A |
| Cover End Flow @ RPM | N/A |
| Cover End Pressure [Max | N/A |
| Pump Series | N/A |
| Shaft Length | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter | 2520V17A11-1BA22R |
| Port Type | 3000 |
| Pressure Port Size, Shaft End | 2500 |
| Minor Diameter [Min | 16.5 |
| Cover End RPM [Max | 25.5 |
| Relief Valve Setting | N/A |
| Shaft Seal Type | Outlet 135° CCW from Inlet |
| Seal Material | Outlet 90° CCW from Inlet |
| Shaft End RPM [Max | 3/4 in Code 61 |
| Spline Description | 1 in Code 61 |
| Port Orientation - Cover End | 2.2 |
| Major Diameter [Min | 3.4 |