Rexroth PVV4-1X/098RJ15UMC Vane pump
Browse Rexroth PVV4-1X/098RJ15UMC Vane pump Categories in the Manufacturers Online Free. 9.9 Inch | 251.5 Mil Nominal Bolt Center to Center 8.875 Inch | 225.425 Bolt Spacing Minimum including Rexroth Vane pump.
| Brand Name: |
Rexroth |
| Model Number: |
PVV4-1X/098RJ15UMC |
| Shaft Key: |
75.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Manufacturer Part No.: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
3520VQ38A11-11BB20 |
| Displacement Cover End (cu in/revolution): |
3 |
| Weight: |
Flange |
| Shaft Type: |
N/A |
| Mounting Flange: |
Standard Pilot |
Product Details
| Shaft Key |
75.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Manufacturer Part No. |
Right Hand (CW) |
| Cover End Flow @ RPM |
3520VQ38A11-11BB20 |
| Displacement Cover End (cu in/revolution) |
3 |
| Weight |
Flange |
| Shaft Type |
N/A |
| Mounting Flange |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Shaft End Flow @ RPM |
14 Tooth Splined |
| Port Orientation - Shaft End |
3520VQ |
| Relief Valve Setting |
1 15/16 in |
| Max. RPM [Max |
Buna-N |
| Shaft Dia. |
2400 |
| Cover End RPM [Max |
1.04 in |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| Rotation |
Single Shaft Seal |
| Integral Valve Configuration |
12/24 |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Port Orientation - Cover End |
2400 |
| Shaft Length |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting |
1.248 in |
| GPM @ 1,800 rpm, Shaft End |
1.247 in |
| Spline Description |
N/A |
| Port Type |
N/A |
| Minor Diameter |
N/A |
| Port Size |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pilot Type |
3520VQ38A11-11BB20 |
| Model No. |
3000 |
| Shaft End Pressure [Max |
3000 |
| Controlled Flow Rate |
16.5 |
| GPM @ 1,800 rpm, Cover End |
57 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 45° CCW from Inlet |
| Pressure Port Size, Cover End |
Outlet 90° CCW from Inlet |
| Minor Diameter [Min |
3/4 in Flange |
| Pump Series |
1 1/4 in Flange |
| Shaft Seal Type |
2.22 |
| Seal Material |
7.42 |